Zig-zag label blower for plastic recycling

First, the principle of use
The ST series of label separators are mainly used for the separation of residual bottle labels and plastic chips in the recycling line of PET bottles.

Second, the characteristics
All materials in contact with the material are made of stainless steel and will not rust contaminants.
Principle: Separate the bottle label and plastic chips with a specific gravity. The bottle label and the plastic chip are simultaneously dropped into a sealed box. The suction fan on the side will remove the lighter material, and the heavier plastic pieces will fall down, thus achieving the bottle mark and plastic fragments. Separation.

Third, the method of use
1. Due to the nature of the machine, it is not possible to pour the material into the container at one time, which can easily lead to blockage. The machine should be started first and the material should be discharged quickly.
Open the fan and observe whether the plastic debris contains the bottle mark. If it is, you need to adjust the butterfly valve step by step until the bottle is not included in the discharge. Also observe whether the bottle contains the bottle and if necessary Make adjustments until the stable bottle label on both sides is separated from the bottle and stabilized.
2. This machine can be used alone or in series to the production line. It can be fully automatic and individually controlled in the production line.

Fourth, matters needing attention
1. The glass door cannot be opened during operation, which will affect the separation of bottle labels and plastic fragments;
2, the machine should be well grounded to avoid motor leakage and injury.