- Home
- >
- News
- >
- Company News
- >
- Bale Breaker
Bale Breaker
Bale Breaker
1. Purpose
ST-3000 bale breaker is used as auxiliary machine of bottle production line, is
mainly used for breaking bales for baled bottles.
2. Features
It is with double speed motor, user can adjust the rotary speed of motor in
accordance with requirement of capacity. There is adjusting valve on the air cylinder
which can used to adjust working speed of air cylinder, makes the air cylinder quick
forward and slow backward, to keep the forwarding speed of air cylinder same to
forwarding speed of belt.
The max dimension: 1100mm×1100mm×800mm.
3. Using guide
1) Please check if the bottom bolts is stable before start-up to avoid shaking;
2) Transfer the baled bottles to the flat table with active roller by forklift and
crane, see the picture, cutting off the steel thread by cutter, draw out it,
but if it’s PET belt or PP fabric belt, it’s no need to cut off, you can put it
directly to machine, then start it and air cylinder, and push it into machine
for breaking.
3) There are paws on the axel of machine which is able to separate the
bottles in machine.
4. Notice
1) You should periodically (one week) charge the No 3 or No 4 calcium grease
as lubrication for every bearing, and check if every bearing are working
normally, you have to periodically (one month) charge the industrial
gearwheel oil for reducer, and charge the lubrication L-AN100 to chain
wheel each week, the position of charging is as picture.
2) You have to clean the machine after each shift running to keep it working
well.
3) The belt will expand after long time’s running, it will cause slip and
deflected run, if long time using it, it will cause damage, so you have to
adjust the belt adjusting bolts at both sides (right and left) while stopping
machine, firstly, adjust the tightness of belt to a suitable extent, then
open the machine to check if there is deflection till the belt gets normal
running.
4) The machine must keep at a good grounding to avoid leaking electricity.
5) Don’t put steel things into machine to affect the running.